MGI JETvarnish 3D 52L (B2)

  • Digital spot UV coating/hot-foiling for 2D/3D effects on B2 sheets
  • Turns plain printed jobs into remarkable and appealing print jobs 
  • Produces brilliant foil effects on digital and off set jobs
  • Perfect registration with the revolutionary AIS SmartScanner
  • Personalization with variable data foiling
  • For differentiation and added value 

Solutions

Solutions

Embellishment - Transform your printing with digital varnish technology

'Haptic technology' lets you simulate touch in a digital environment, and today's most successful commercial printers are already enhancing their services by using the technology to offer a more appealing and creative...

Features

Features

Differentiate yourself

If you are looking into di­fferentiating and upgrading your services, go for the MGI JETvarnish 3D 52L as the ideal solution for digital and o­ffset print providers. Turn plain printed jobs into remarkable and appealing prints by spot coating digital and o­ffset prints, highlighting defined areas, or adding tactile 3D e­ffects with our digital spot UV coating device MGI JETvarnish 3D 52L. And by combining it with the inline hot-foiling module, you’ll achieve an even more glamorous finish.

Specifications & Downloads

Specifications & Downloads
Printing technology MGI’s exclusive inkjet engine technology
Drop-on-Demand (DOD) inkjet application
Piezoelectric printheads in single pass printing
Flexible and scalable architecture
Variable coating
thicknesses
Depending on your file and the substrate used, the coating thickness
can vary from a traditional flat spot UV coating of 7 μm up to
232 μm for 3D raised texture effects and a tactile finish.
Production speed(1) Up to 3,123 B2 sheets size per hour (flat spot UV coating or 2D)
Registration Left and right motorized registration side guides. Automatic registration
using the built-in AIS SmartSanner technology for real-time
management of entire sheet. No registration marks required.
Overall registration of ± 200 μm.
Managed paper
formats(2)
Min.: 42 x 29.7 cm / 16.5” x 11.5” (A3 in landscape mode)
Max.: 57 x 120 cm / 22.4” x 47”
75 x 120 cm / 29.5” x 47”
Printable
width areas
54 x 118 cm / 21.3” x 46.5”
Substrate thickness(3) Min.: 135 gsm and not less than 150 μm / 6 mil before printing
and lamination
Max.: Up to 600 gsm
Substrate
compatibility(3)
Enhancement on most matte or glossy laminated surfaces, with
or without aqueous coating, layered paper, plastic, PVC and other
coated materials. Spot 3D coat directly onto most digital prints.
UV coatings and
capacity
coating tank for both 2D and 3D applications. One high-capacity
tank of 18 liters. “On-the-fly” tank changeover possible during
production without any interruption or waste.
Automatic
sheet-fed feeder
High-capacity feeder able to handle a paper pile up to 60 cm /
23.6” high for 57 x 120 cm (22.4” x 47”) sheets. Approximately
4,000 sheets at 135 gsm.
Pallet stacker High-capacity stacker able to accommodate stakes up to 60 cm /
23.6” high for 57 x 120 cm (22.4” x 47”) sheets.
Approximately 4,000 sheets at 135 gsm.
Paper path 100% flat paper path
Vacuum feed system
Air feed system
Automatic double sheet detection
In-line UV dryer “On-the-fly” drying and curing via integrated UV lamps
Front end system Intuitive touchscreen software management suite controlled
by a 27” monitor
Includes functions for operators: Job cost calculator, image editor,
queue manager and reprint, camera and printhead settings
Dedicated controller for equipment settings and technical data
Ethernet connection 10/100/1000 BT in RJ 45
iFOIL Optional Digital Hot Foiling module application
Production speed: Up to 1,750 (1) B2 sheets size per hour (or up
to 25 m / 65.6’ per minute)
Films: Optimization system of film consumption
Film Rolls: Max. roll diameter and length: ± 30 cm / 11.8”
and from 400 – 2,000 m / 1,300’ – 6,500’ of film. Up to three
simultaneous film rolls on the same axis (with a minimum of 10
cm / 3.9” per roll). Two cores available: 1” and 3”
Maximum surface: Hot foil substrate surface cannot exceed
57 x 118 cm (22.4” x 46.5”) (4)
Embossing: 3D hot foil raised effects. The surface of the metallized
film may be covered with a layer of varnish or another foil
Other options Corona (5) (6) substrates treatment module: In-line system
made to optimize varnish adhesion on complex printed
substrates
Pallet feeder: Supports sheets up to size 75 x 120 cm / 29.5” x 47”
Pallet stacker: Supports sheets up to size 75 x 120 cm / 29.5” x 47”
Variable data printing (VDP)
Manage and edit files on the workstation
Full variable data (text, graphic, image) for both 2D/3D spot
coating and hot foiling areas
Integrated barcode (1D/2D) reader system and controller
Raster image processor (RIP) as an option
Maintenance and
remote technical
support
Daily maintenance completed in less than 10 minutes
Majority of procedures are automated
From cold start to production in less than 15 minutes
Remote troubleshooting and support via included web video
camera (high-speed internet connection required)
Dimensions
and weight
JETvarnish 3D 52L
Up to 12.42 x 1.93 x 1.84 m / 40.7’ x 6.3’ x 6.0’ (L x W x H) (7)
Necessary clearance: 1 m / 3.3’ on four sides
+ iFOIL L Up to ± 4,529 kg / 9,984 lbs(7)
Dry air requirements An on-site dry air system is necessary
Electrical
requirements
JETvarnish 3D: 400 V, 50/60 Hz, 32A (63A plug)
+ iFOIL L: 400 V, 50/60 Hz, 25A (32A plug)
Operating
environment
Temperature: From 18 – 30°C / 64 – 86°F
Relative humidity: Between 30 and 50% (no condensation)

The default sheet size is B2 ISO (50 x 70.7 cm / 19.7” x 27.8”) unless otherwise stated.
All speeds are nominal.

(1) Speed will vary according to printing parameter used.
(2) With the pallet feeder and stacker options.
(3) Confirm substrate/lamination/toner/metallic film compatibility with Konica Minolta.
(4) Standard configuration.
(5) Require substrate above 42 cm width.
(6) Require paper above 250 gsm / 250 μm.
(7) Depending on the configuration selected.

  • The support and availability of the listed specifications and functionalities varies depending on applications as well as system configurations.
  • The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size. The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
  • All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.
  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications, network protocols as well as network and system configurations.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that all specifications mentioned will be error-free.
  • Microsoft, Windows and the Windows logo are trademarks, or registered trademarks, of Microsoft Corporation in the United States and/or other countries.
  • All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

Get the product brochure now to have all information at hand.

MGI JETvarnish 3D 52L brochure

Related hardware

Related hardware