MGI jetvarnish 3D Evo professional printer

MGI JETvarnish 3D Evolution (B1)

Digital spot UV coating/hot-foiling for 2D/3D effects
Turns plain printed jobs into remarkable and appealing print jobs
Produces brilliant foil effects on digital and off set jobs
Perfect registration with the revolutionary AIS SmartScanner
For differentiation and added value

Differentiate yourself

If you are looking into differentiating and upgrading your services, go for the MGI JETvarnish 3D Evolution as the ideal solution for digital and offset print providers. Turn plain printed jobs into remarkable and appealing prints by spot coating digital and offset prints, highlighting defined areas, or adding tactile 3D effects with our digital spot UV coating device MGI JETvarnish 3D Evolution. And by combining it with the inline hot-foiling module, you’ll achieve an even more glamorous finish.

Specifications
Printing technology	Exclusive MGI inkjet engine technologyDrop-on-Demand (DoD) inkjet applicationPiezoelectric print heads in single pass printing
Coating thicknesses	Depending on the print file and substrate used, the coatingthickness can vary from a traditional flat spot UV coatingof 3** μm up to 232 μm for 3D raised texture effects and atactile finish.
Production speed	Up to 3,123 ISO B2 sheets per hour in all versionsThe version Evo 75 can reach up to 4,200* ISO B2 sheets perhour (in landscape) and up to 2,291 ISO B1 sheets per hour
Registration	SmartScanner coupled with Artificial Intelligence (AIS) for areal-time fully automated sheet-to-sheet registration processNo crop marks required
Formats	Min: 42 x 29.7 cmMax: 52 x 120 cm 75 x 120 cm
Printable areas	Max: 51 cm / 74 cm
Substrate thickness	Min: 135 gsm and not less than 150 μm beforeprinting & laminationMax: 800 gsm and not more than 800 μm beforeprinting & lamination ***
Substrates	Enhancement on most** matte or glossy laminated surfaces,with or without aqueous coating, layered paper, plastic,PVC and other coated materials. The used substrate needsto be either coated or laminated. Otherwise the media willabsorb the varnish and the desired effect might be lost
Varnish on toner	Spot 3D coat directly onto most** digital prints
UV coatings and capacity	1 coating tank for both 2D & 3D applicationsOne high capacity tank of 18 litres“On-the-fly” tank changeover possible during productionwithout any interruption and no waste
Automatic feeder	High capacity feeder for paper stacks of up to 60 cm heightfor 75 x 120 cm sheets ***Approximately 4,000 sheets at 135 gsm
Pallet stacker	Supports sheets of up to 75 x 120 cm size on pallet packaging
Paper path	100% flat paper pathVacuum feed systemAir feed systemAutomatic double sheet detection
Front end system	Intuitive touchscreen software management suite controlledby a 27’’ monitorJob cost calculator, image editor, queue manager and reprint,camera and print head settings and reprint, dedicatedcontroller for equipment settings and technical dataEthernet connection 10/100/1000 BT in RJ 45
In-line UV dryer	“On-the-fly” drying & curing via integrated UV lamps
Maintenance & remote technical support	Automated inkjet head cleaning and wipingDaily maintenance completed in less than 10 minMainly automated proceduresFrom cold start to production in less than 15 minRemote troubleshooting & support via included web videocamera (high-speed internet connection required)
Operator panel	Integrated user-friendly LCD touchscreen
Production speed	Up to 2,300 B2 landscape sheets per hour
Formats	Up to 75 x 120 cm
Hot foil stamping area	Max: 74 x 119 cm
Substrate thickness	Min: 150 μmMax: 600 μm (standard), 800 μm (optional)
Foil rolls	Max. roll diameter and length: approx. 30 cm and from400 to 2,000 meters of filmUp to 5 simultaneous film rolls on the same axis(with a minimum of 10 cm per roll)2 cores available Change for: 1 inch as standard and3 inches as option
Dry air	Requires air without oil at 6 bar (87 psi) & 24 m3/h (14 cfm)
Dimensions (L x W x H)	Up to 12.72 x 1.86 x 1.84 meter (Evo 75 full options)
Weight	Approx. 4,524 kg
Electrical requirements	40 kW (63 A) at 400 Volts - 50/60 Hz + 20 kW (32 A) at400 Volts - 50/60 Hz
Temperature	18 to 30°C
Relative humidity	between 30 and 50% (no condensation)
Corona1/2 substratestreatment module	In-line system to optimise varnish adhesion on complexprinted substrates
Variable Data Printing(VDP)	– Full variable data (text, graphic, image) for both2D/3D spot coating and hot foiling areas– Integrated barcode (1D/2D) reader system & controller– Raster Image Processor (RIP) as an option
	Not Available
	Not Available

Success Stories

Bonbox: This is a true game-changer for customers

Learn more about the background of the investment for druckpartner, how they position themselves in the market with the new offer they can make through this machine, how it changed their way of approaching and retaining customers and about the emotional value (and therefore a USP) embellishment brings to a print product.

The brochure of the MGI JETvarnish 3D Evolution

Download brochure

The frame brochure

Download frame brochure

Information on UV Varnish Safety

At Konica Minolta, we are committed to full regulatory compliance and transparency.

Some MGI ink and varnish products contain a photoinitiator (TPO) that has recently received an updated EU and UK safety classification. While typical print applications remain unaffected, new labeling and documentation are required.

To learn more about the classification update and our measures to ensure safe and compliant use, please review our Varnish Information Document below.

Varnish Information Document