Enables colour evaluation taking into consideration the fluorescence of paper under any illuminant, including D50 (M1)
We are proud to offer the world’s only handheld instruments that can measure both density and colour of printed matter for any illuminant even if the substrate contains fluorescent whitening agents (FWA): The Spectrodensitometers FD-7 and FD-5.
The Fluorescent Spectrodensitometers FD-7 and FD-5 are equipped with the newest technology of Konica Minolta: VFS (Virtual Fluorescence Standard). This technology enables colour evaluation taking into consideration the fluorescence of paper under any illuminant, including D50 (ISO 13655:2009 M1). The new VFS technology takes advantage of the optical, sensor and software technology cultivated through our long experience with colour-measuring instruments to enable measurements for a variety of illuminants while including the influence of fluorescence.
The FD-5 is the perfect tool to help printers in their daily business. The lightweight FD-5 makes process and quality control easier and more reliable.
TARGETMATCH including backing conversion helps printers to achieve the right colour on their production paper.
ISOCHECK enables fast quality control without additional software.
DeltaBrightness gives unambigous information about the amount of optical brightener and allows a fast control of production papers.
The Spectrophotometers FD-5 and FD-7 were the world’s first M1-type instruments, utilizing Konica Minolta’s original VFS (Virtual Fluorescence Standard) to provide measurements corresponding to D50. Konica Minolta's VFS makes the FDs the only instruments that can measure FWAs for any chosen illuminant, including self-measured illuminants.
With spectrophotometers, white calibration is performed as part of the daily work, and this calibrates the spectral reflectance coefficients (vertical axis). The new FD-7 and FD-5 are equipped with the industry’s first “Automatic Wavelength Compensation” function which automatically calibrate in the wavelength direction (horizontal axis) when white calibration is performed as part of daily work, greatly improving the reliability of measurement values.
Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil 7, ASTM E 1164, and JIS Z 8722 Condition A for reflectance measurements.
Spectral separation device
Spectral reflectance 380 to 730 nm
Approx. 10 nm
Density: 0.0D to 2.5D; Reflectance: 0 to 150%
Colorimetric: Within σΔE00 0.05 (When white plate is measured 30 times at 10-second intervals after white calibration has been performed)
Within ΔE00 0.3 (Average of 12 BCRA Series II colour tiles compared to values measured with a master body under Konica Minolta standard conditions)
Approx. 1.4 s (single-point reflectance measurement)
Corresponding to ISO 13655 Measurement Conditions M0 (CIE Illuminant A), M1 (CIE Illuminant D50), M2 (illumination with UV-cut filter) and M3 (CIE Illuminant A with polarization filter); User-defined illuminant
A, C, D50, ID50, D65, ID65, F2, F6, F7, F8, F9, F10, F11, F12, User-defined illuminant
2° Standard Observer, 10° Standard Observer
L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ and colour-difference in these colour spaces
ΔE*ab (CIE 1976), ΔE*94 (CIE 1994), ΔE00 (CIE 2000), ΔE (Hunter), CMC (l:c)
WI (ASTM E313-96); Tint (ASTM E313-96); ISO Brightness (ISO 2470-1); D65 Brightness (ISO 2470-2); Delta Brightness ("Fluorescent Whitening Intensity")
ISO Status T, ISO Status E, ISO Status A, ISO Status I; DIN16536; Spectral density for spotcolours
Greybalance (densitometric & colorimetric), ISOCHECK (QC against ISO or own standards), TARGETMATCH
Single data: Colorimetric target data: 30 data; Density target data: 30 data
50 colour sets: 15 colorimetric target data per colour set with 3 additional tone values each. ColorSets for standard printing conditions are already included.
English, French, German, Spanish, Japanese, Chinese (simplified)
Colorimetric and densitometric values
Rechargeable internal lithium-ion battery (Number of measurements per charge: Approx. 2,000 when new); AC adapter; USB bus power
Dimensions (W × D × H)
70 × 165 × 83mm (Body only); 90 × 172 × 84mm (With target mask attached)
Operating temperature/humidity range
10 to 35°C, 30 to 85% relative humidity with no condensation
Storage temperature/humidity range
0 to 45°C, 0 to 85% relative humidity with no condensation
The software “FD-s1w” offers several functions
It enables transfer of measurements to MS® Excel®. The user can specify the values to be sent as well as the ordering.
The software allows to measure light sources, save them as file and upload them to the FD-7 or FD-5. It allows to download spectra which are stored in the FD-7 for saving them to a harddisk for later reuse.
A ColorSet holds colour and tone value standards.
These can be used to:
Standard ColorSets are already included which are:
Note - your current cookie settings will exclude you from receiving promotional updates via email! To allow those updates,
update your cookie settings