The CR-400 and CR-410 are cost effective QC colour measurement instruments with 8mm and 50mm measuring apertures.
Konica Minolta Chroma Meters have a long heritage for offering organisations cost effective, traceable colour quality control measurements.
The CR-400 has an 8 mm measuring area, suitable for measuring reflected colour and colour difference in a wide range of industrial fields. It is widely used for colour QC in various applications including ingredients, foods, raw materials and finished products.
If samples are structured or uneven in surface, such as granulates, fabrics, wood, stones, bricks, then the CR-410 is the right choice. The unique large aperture (50 mm) is ideal for such samples where the operator would otherwise need to manually average several measurements to obtain representative and repeatable data.
The "*" mark indicates functions available only when the Data Processor is connected or when the required settings have been made.
The "*" mark indicates functions that can be used only when the measuring head is connected.
Portable Colorimeter with unmatched ruggedness and application flexibility
For measurements of powders, pastes, grains or other small sized granular material. The low reflectance glass plate protects the sample surface against disorientation and prevents specimen material to enter the instrument. The set includes one retaining ring each to adjust the measuring area accordingly to either CR-400 or CR-410.
Item Order Code: 1829-751
Replacement low reflectance glass plate for CR-A50 Granular Attachment.
Item Order Code: 1829-752
Replacement ring set for CR-A50 Granular Attachment. The set consist of one ring each for CR-400 and CR-410.
Item Order Code: 1829-753
Light projection tube for measurement of pasty, wet or moist samples. The convex protection glass plate prevents specimen from entering the instrument. The CR-A33a is recommended for soft specimen. The diameter of the plate is 22 mm.
Item Order Code: 1849-731
Standard light projection tube with 40 mm plastic disc. Provides high stability on the sample. Recommended for all standard applications.
Order Item Code: 1849-732
Light projection tube without plate for measurements on small samples where the 40 mm or 22 mm plate is too large.
Item Order Code: 1849-733
Light projection tube with a plate of 22 mm diameter. Allows measurements on small specimen with high stability against tilting of the measuring head.
Item Order Code: 1849-734
Light projection tube for measurement of pasty, wet or moist samples. The protection glass plate prevents specimen from entering the instrument.
Item Order Code: 1849-735
Light projection tube for measurement of soft samples. The concave protection glass plate prevents specimen from entering the instrument. The CR-A33a is recommended for flattening soft or soft and wet specimen. The diameter of the plate is 22 mm diameter.
Item Order Code: 1849-736
Required to fix opaque samples or the Glass or Disposal cells for measurement of opaque liquids in combination with the Sample Holder CR-A505. The clamp provides a constant pressure to the sample and the moveable side holders keep the cells in correct position.
Item Order Code: 1864-708
Cell made of optical glass with an optical path of 10 mm. Recommended for precise reflectance measurements of opaque liquids in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.
Item Order Code: 1864-710
Cell with made of optical glass with an optical path of 20 mm. Suitable for precise reflectance measurements of opaque liquids with lower density in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.
Item Order Code: 1864-711
Disposal plastic cell with an optical path of 10 mm. Suitable for reflectance measurements of water based opaque liquids in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.
Item Order Code: 1870-716
Disposal plastic cell with an optical path of 20 mm. Suitable for reflectance measurements of water based opaque liquids with lower density or opaque paste in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.
Item Order Code: 1870-717
For measurements of powders, grains and granular materials in combination with the Glass Cell CR-A504. The measuring head is set to up-side down position and the Cell Holder CR-A501 precisely fixes the position of the Glass Cell CR-502.
Item Order Code: 9970-219
Glass Cell made of optical glass for measurements of powders, pastes, grains and small granular materials. Diameter of the cell 60 mm. For precise positioning the Cell Holder CR-A501 is recommended.
Item Order Code: 9970-220
Cell made of optical glass for measurements of powders, pastes, grains and small granular materials. Diameter of the cell 34 mm. For precise positioning the Cell Holder CR-A503 is recommended.
Item Order Code: 9970-2504
Base holder to set the measuring head in horizontal position. Allows in combination with the Specimen Holder CM-A96 measurements of small samples up to a thickness of 22.5 mm or with the Glass- or Disposal Cells with 10 or 20 mm optical path the measurement of opaque liquids.
Item Order Code: 9970-441
For continuous measurements of opaque liquids in reflectance mode. The optical path of the cell is 10 mm and the max. pressure is up to 2 Bar. For the positioning of the Flow Cell CM-A508 the horizontal aligned Sample Holder CR-A505 and the Sample Holder CM-A96 are required.
Item Order Code: 9970-237
The CM-A516 Vertical allows aligning the instrument in Up-Side-Down position and secures that the instrument cannot get out of balance by using the Cell-Holder CR-A503 for CR-400 and CR-A501 for CR-410.
Item Order Code: B027154
For comfortable hand carrying and storage of measuring head, data processor and accessories.
Item Order Code: 1878-600
Connection cable between measuring head or data processor and PC. For PC terminals with 9 pin SUB-D connecter. Length of the cable 2 m.
Item Order Code: 1878-704